HIGH TEMPERATURE CALCIUM SILICATE INSULATION SLABS
LG-STANDARD TYPE CALCIUM SILICATE PRODUCTS
Items | Unit | LG-Standard Type | GB/T10699- 1998 | JISA9510-1995 NO.1-22 | |||
HCS-17 | HCS-20 | HCS-23 | HCS-25 | ||||
Bulk Density | kg/m3 | 170 (±10%) | 200 (±10%) | 230 (±10%) | 250 (±10%) | ≤220, ≤270 | ≤220 |
Flexural Strength | MPa | ≥0.25 | ≥0.35 | ≥0.45 | ≥0.50 | ≥0.30 | ≥0.30 |
Thermal Cond | W/m.k | 0.058 100℃ | 0.062 100℃ | 0.067 100℃ | 0.069 100℃ | ≤0.065 (100℃) | ≤0.062 (70℃) |
Temp. Limit | ℃ | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 |
Linear Shrinkage | % | ≤2 (1000℃,16hrs) | ≤2 (1000℃,16hrs) | ≤2 (1000℃,16hrs) | ≤2 (1000℃,16hrs) | ≤2 (1000℃,16hrs) | ≤2 (1000℃,3hr) |
Products with max. service temp. of 650℃ are also available here.
LG-HIGH TEMP TYPE CALCIUM SILICATE PRODUCTS
Based on 1000℃ LG-Standard Type,the temp. limited of this type is improved to 1100℃. As our paten, LG-High Temp. Type can be used for high temp position of industrial furnaces.. | |||
Items | Unit | LAIGE Brand | |
SCS-25 | |||
Bulk Density | kg/m3 | 250±10% | |
Flexural Strength | MPa | ≥0.50 | |
Temp. Limit | ℃ | 1100 | |
Linear Shrinkage | % | ≤2(1050℃,3hrs) | |
Themal Cond | W/m·k | ≤0.069 100℃ |
Block Sizes and Dimensional Tolerances
Length(±3mm) | Width(±3mm) | Thickness(+3 -1.5 mm ) |
400 | 250 | 25-120 |
500 | 500 | 25-120 |
600 | 300 | 25-120 |
610 | 400、303、300、150 | 25-120 |
1000 | 500 | 25-120 |
1080 | 950 | 25-120 |
1220 | 1220 | 25-100 |
t,the mean temp. of hot surface and outer surface.
Please contact us if customers require other sizes and shaps orspecial machining.
*Auxiliary Products
BP-1 high temp. adhesive powder-blended with water glass to form a mortar for the tight connection between insulating slab and other constructural component.(BP-1 consumption: about 3.0kg/m2)
WP-1 waterproof agent-covered on the surface of ready-constructed slabs in order to spread castables on it .(WP-1 consumption: about 0.8kg/m2)
LG-PASTE TYPE CALCIUM SILICATE COATING
Items | Unit | Index |
Paste Density | kg/m3 | 1000 |
Paste Bulk Drying Shrinkage | % | 20 |
Temp. Limit | ℃ | 850/1000 |
Drying Density | kg/m3 | 260 |
Themal Cond | W/m·k | 0.065 70℃ |
Characterized by low drying shrinkage, good thermal stability, resisting alkali, weak acid corrosion and oil water soak, good adaptability, easy construction and no environmental pollution, LG-Paste Type insulation coating can be widely used for all types of furnaces, kiln, tower, pot, pipe, valve etc, especially easy construction for special-shaped equipment.
Also we have dry insulation coating and 1260C paste.
Also we have dry insulation coating and 1260C paste.
Construction Area:
Each ton paste can cover an area of 70-80m2 with 10mm thickness. The area of other thickness can be calculated from this.
Each ton paste can cover an area of 70-80m2 with 10mm thickness. The area of other thickness can be calculated from this.
Calcium Silicate Slab is high temperature insulation material.
ReplyDelete