Yellow PU Foam Board
Packaging & Delivery
Specifications
polyurethane (pu) foam sheet
1.thermal insulation performance
2.continuous product line
3.light weigth ,high strength...
1.thermal insulation performance
2.continuous product line
3.light weigth ,high strength...
Product DescriptionPolyurethane is a unique material that offers the elasticity of rubber combined with the toughness
and durability of metal. Because urethane is available in a very broad hardness range (eraser-soft to bowling-ball-hard),
it allows the engineer to replace rubber, plastic and metal with the ultimate in abrasion resistance and physical properties.
Polyurethane can reduce plant maintenance and OEM product cost. Many applications using this ultra-tough material
have cut down-time, maintenance time and cost of parts to a fraction of the previous figures.
Urethanes have better abrasion and tear resistance than rubbers, while offering higher load bearing capacity.
Compared to plastics, urethanes offer superior impact resistance, while offering excellent wear properties and elastic memory.
Urethanes have replaced metals in sleeve bearings, wear plates, sprockets, rollers and various other parts, with benefits
such as weight reduction, noise abatement and wear improvements being realized.
and durability of metal. Because urethane is available in a very broad hardness range (eraser-soft to bowling-ball-hard),
it allows the engineer to replace rubber, plastic and metal with the ultimate in abrasion resistance and physical properties.
Polyurethane can reduce plant maintenance and OEM product cost. Many applications using this ultra-tough material
have cut down-time, maintenance time and cost of parts to a fraction of the previous figures.
Urethanes have better abrasion and tear resistance than rubbers, while offering higher load bearing capacity.
Compared to plastics, urethanes offer superior impact resistance, while offering excellent wear properties and elastic memory.
Urethanes have replaced metals in sleeve bearings, wear plates, sprockets, rollers and various other parts, with benefits
such as weight reduction, noise abatement and wear improvements being realized.
Product Feature
Abrasion resistant
Parts made of polyurethane will often outwear other materials by a margin of 5 to 50/one when severe abrasion is a factor.
It has been proven to be vastly superior to rubber plastics and metal in many applications.
Oil and solvent resistant
Polyurethane has excellent resistance to oils, solvents, fats, greases and gasoline.
Load bearing capacity
Polyurethane has a higher load-bearing capacity than any conventional rubber. Because of this characteristic, it is
an ideal material for load wheels, heavy duty couplings, metal-forming pads, shock pads, expansion joints and
machine mounts.
Tear resistant
Tear-strength ranges between 500-100 Ibs./linear inch, which is far superior to rubbers. As a result, urethane is
often used as drive belts, diaphragms, roll covers, cutting pads, gaskets and chute liners.
Weather resistant
Polyurethane has outstanding resistance to oxygen, ozone, sunlight and general weather conditions.
Excellent noise abatement properties
The hard urethanes are now being used as gears in products where engineers desire sound reduction.
The soft urethanes are used to replace rubbers for improved sound/vibration dampening.
Flex-Life
Most formulations offer extremely high flex-life and can be expected to outlast other elastomer materials
where this feature is an important requirement. Dust boots, bellows, diaphragms, belts, couplings and
similar products are made from urethane for this reason.
Electrical properties
Polyurethane has excellent electrical insulating properties and is used successfully in many moulded wire
and cable harness assemblies.
Heat and cold resistant
Continuous use above 225°F is not recommended nor is urethane recommended in hot water over 175°F.
At low temperatures, polyurethane will remain flexible down to -90°F. A gradual stiffening will occur at 0°F,
but will not become pronounced until much lower temperatures are obtained.
PRECISION-CAST SHEETS
Cast sheets are ideal for fabrication into a wide variety of products. Standard sheets are available in 12" square up to 48"
square sheets in the following thicknesses: 1/32", 1/16", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 1-1/4",
1-1/2", 1-3/4", & 2". Other sizes and thicknesses are available on special order. Tolerances are: 1/32 to 3/16, +.010"; 1/4 to
3/8", +/-.015"; 1/2 to 1-1/4", +/-.025"; 1-1/2" and over, +/-3%.
FABRIC-BACKED SHEETS
Standard sheets are available integrally cast onto duck cloth (.048" thick), permitting easy cementing to metal or
other surfaces. This composite converts effectively to large roll coverings or chute and bin liners. Bond strength
between the fabric and the urethane is excellent, and there is no strikethrough to the exposed side of the fabric.
Sheet is stocked in 3/16", 1/4", 5/16", 3/8", 7/16", and 9/16" overall thicknesses up to 48" square. Custom sizes
and thicknesses are available on special order.
BARS
Bar stock is popular for metal forming uses. The precise size eliminates the need for a matched female die.
The material becomes the contact surface in forming, bending or shaping metal without scratching or marring
the finished product. Bar stock is also used as press-brake pads, bumper pads, and wear strips, and is machined
into a great variety of prototype parts. Standard sizes are available 48" long and in thicknesses of 1" square,
2" square and 2" x 3". Custom sizes are available.
RODS
Cast rods are used for guide, drive and pinch rollers and outwear conventional rubber rollers 20 to 1. They are excellent
for bulge forming. Rod stock is used for prototype parts like gears, bearings and bushing, and is easily machined to
close tolerances. Standard rods are 36" long and are available in diameters of 1/4", 3/8". 1/2", 5/8", 3/4", 7/8", 1", 1-1/4",
1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 2-3/4", 3", 3-1/4", 3-1/2", 3-3/4", 4", 4-1/4", 4-1/2",4-3/4", 5", 5-1/2", 6". Custom sizes are
available on request.
TUBES
Cast tube stock makes excellent roll covers when press fitted over metal cores. They are also converted into gaskets,
seals and rings. Tubes are well suited for prototype parts. Standard cast tubes are 36" long and are supplied in several
diameters (custom sizes available on request): Inside Diameter 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 3"
Outside Diameter 2" 2-1/4" 2-1/2", 2-3/4", 3", 3-1/4", 3-1/2", 3-3/4", 4"
Abrasion resistant
Parts made of polyurethane will often outwear other materials by a margin of 5 to 50/one when severe abrasion is a factor.
It has been proven to be vastly superior to rubber plastics and metal in many applications.
Oil and solvent resistant
Polyurethane has excellent resistance to oils, solvents, fats, greases and gasoline.
Load bearing capacity
Polyurethane has a higher load-bearing capacity than any conventional rubber. Because of this characteristic, it is
an ideal material for load wheels, heavy duty couplings, metal-forming pads, shock pads, expansion joints and
machine mounts.
Tear resistant
Tear-strength ranges between 500-100 Ibs./linear inch, which is far superior to rubbers. As a result, urethane is
often used as drive belts, diaphragms, roll covers, cutting pads, gaskets and chute liners.
Weather resistant
Polyurethane has outstanding resistance to oxygen, ozone, sunlight and general weather conditions.
Excellent noise abatement properties
The hard urethanes are now being used as gears in products where engineers desire sound reduction.
The soft urethanes are used to replace rubbers for improved sound/vibration dampening.
Flex-Life
Most formulations offer extremely high flex-life and can be expected to outlast other elastomer materials
where this feature is an important requirement. Dust boots, bellows, diaphragms, belts, couplings and
similar products are made from urethane for this reason.
Electrical properties
Polyurethane has excellent electrical insulating properties and is used successfully in many moulded wire
and cable harness assemblies.
Heat and cold resistant
Continuous use above 225°F is not recommended nor is urethane recommended in hot water over 175°F.
At low temperatures, polyurethane will remain flexible down to -90°F. A gradual stiffening will occur at 0°F,
but will not become pronounced until much lower temperatures are obtained.
PRECISION-CAST SHEETS
Cast sheets are ideal for fabrication into a wide variety of products. Standard sheets are available in 12" square up to 48"
square sheets in the following thicknesses: 1/32", 1/16", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 1", 1-1/4",
1-1/2", 1-3/4", & 2". Other sizes and thicknesses are available on special order. Tolerances are: 1/32 to 3/16, +.010"; 1/4 to
3/8", +/-.015"; 1/2 to 1-1/4", +/-.025"; 1-1/2" and over, +/-3%.
FABRIC-BACKED SHEETS
Standard sheets are available integrally cast onto duck cloth (.048" thick), permitting easy cementing to metal or
other surfaces. This composite converts effectively to large roll coverings or chute and bin liners. Bond strength
between the fabric and the urethane is excellent, and there is no strikethrough to the exposed side of the fabric.
Sheet is stocked in 3/16", 1/4", 5/16", 3/8", 7/16", and 9/16" overall thicknesses up to 48" square. Custom sizes
and thicknesses are available on special order.
BARS
Bar stock is popular for metal forming uses. The precise size eliminates the need for a matched female die.
The material becomes the contact surface in forming, bending or shaping metal without scratching or marring
the finished product. Bar stock is also used as press-brake pads, bumper pads, and wear strips, and is machined
into a great variety of prototype parts. Standard sizes are available 48" long and in thicknesses of 1" square,
2" square and 2" x 3". Custom sizes are available.
RODS
Cast rods are used for guide, drive and pinch rollers and outwear conventional rubber rollers 20 to 1. They are excellent
for bulge forming. Rod stock is used for prototype parts like gears, bearings and bushing, and is easily machined to
close tolerances. Standard rods are 36" long and are available in diameters of 1/4", 3/8". 1/2", 5/8", 3/4", 7/8", 1", 1-1/4",
1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 2-3/4", 3", 3-1/4", 3-1/2", 3-3/4", 4", 4-1/4", 4-1/2",4-3/4", 5", 5-1/2", 6". Custom sizes are
available on request.
TUBES
Cast tube stock makes excellent roll covers when press fitted over metal cores. They are also converted into gaskets,
seals and rings. Tubes are well suited for prototype parts. Standard cast tubes are 36" long and are supplied in several
diameters (custom sizes available on request): Inside Diameter 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 3"
Outside Diameter 2" 2-1/4" 2-1/2", 2-3/4", 3", 3-1/4", 3-1/2", 3-3/4", 4"
ApplicationBelts
Metal forming pads
Wear strips
Bumpers
Gears
Bellows
Machinery mounts
Cutting Surfaces
Sound-dampening pads
Chute and hopper liners
Prototype machined parts
Gaskets
Seals
Rollers
Roller covers
Sandblast curtains
Diaphragms
Metal forming pads
Wear strips
Bumpers
Gears
Bellows
Machinery mounts
Cutting Surfaces
Sound-dampening pads
Chute and hopper liners
Prototype machined parts
Gaskets
Seals
Rollers
Roller covers
Sandblast curtains
Diaphragms
No comments:
Post a Comment